Universal Testing machine capacity 20Ton

Technical Specification:

1. Max. loading Capacity:  20TON
2. Ram Stroke: 200mm
3. Displacement Resolution: 0.1mm
4. Extension Resolution: 0.1mm
5. Piston speed at no load: 0.150mm
6. Clearance for Tension test: 50-700mm
7. Clearance for Compression test: 0-700mm
8. Clearance between columns: 500mm
9. Cross head speed: 0-100mm/min.
10. Machine Weight: 1200kg
11. Connected Load:  2.5KW.
12. Operating Voltage: 400-440 VAC, 3 Phase.
13. Tension test
14. Clamping for round Specimens diameter(mm)- 10-20,20-30
15. Clamping jaws for flat Specimens diameter(mm) - 0-10, 10-20
16. Width - 50mm
17. Compression test
18. Pair of compression plates of diameter – 120
19. Transverse test
20. 1. Table with adjustable rollers Width of rollers- 160mm
21. 2. Diameter of Rollers-30(mm)

22. 3. Maximum clearance between supports(mm) -500(mm)

    4. Radius of punch tops(mm) - 6,12 

     

23. Application:  Universal Testing Machine it can perform all the tests right from compression, bending to tension and examine the material in all mechanical properties.
24. Accuracy & Calibration: machine is than calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610: 1964 and IS: 1828-1975. Universal testing machine comply with grads “A” of BS : 1610 : 1964 and grade 1.0 of IS – 1828- 1975 an accuracy of =1% is guaranteed from 205 of the load range selected to full  load Bellow 20% of the selected range, the maximum permissible errpr is 0.2% of the full reading.
25. Machine consists of : Straining Unit ,Control panel power, Hydraulic Controls, Load indictor System, Automatic Continuous Roll load- Elongation recorder
26. Software Features:

27. Test can conduct:

    Tensile test

    Compression test bend Test

    Single Shear

    Double Shear

    Proof test (Stress Vs 5 strain (if Extensometer is used)

28. Real time Graphs:

    Dual graph- stress Vs % Strain and Load Vs displacement 9 if Extensometer is used Load Vs Displacement

29. Specimen types: 

    Round 

    Flat hollow

    Tor/ TMT steel

30. Some date Entry points :

    Pre- load Date Entry to avoid slippage in graph

    Fully customized data entry

    Extensometer Gauge length Selection-10, 25,50 mm

    Lower force data entry in % of maximum load to calculate proof stress

31. Units:

    Load –KN, kG, N 

    Tress- KN/mm2, N/mm2 (Map), Kg/mm2

    Displacement-mm

    Before start test you will get all information entered regarding test.

    Fully customized header & footer information for test report.

Facilities to search ;- ultimate Load, Ultimate strength, displacement at Ultimate Load, Maximum Displacement.% Elongation, %Reduction in area, Breaking Load, breaking stress, Yield Load, Yield Strength, 0.02%proof Strength, 0.1% proof Strength, 0.2% proof Strength, 0.5%proof Strength, 1% Proof Strength, all proof loads, Young’s, modulus